|
|
|
|
|
|
Concrete Test Cylinder
|
|
|
Bio-degradable, Recycable, Virtually unlimited shelf life. BIO-CYLINDER test cylinders meet A.S.T.M. specifications C39,C192 and C470. BIO-CYLINDER mold is non-absorptive. Molded single unit for consistent dimensional uniformity; Smooth molded plastic allows quick,easy stripping. Strong, durable BIO-CYLINDER is weather resistant, eliminates job-site storage problems
|
|
|
|
|
|
|
|
|
|
3/4" Plastic Drum Spigot
|
|
|
3/4" Plastic Drum Spigot, fits most 55 Gal drums. East on-off flow valve.
|
|
|
|
|
|
|
|
|
|
Hydraulic Cement, 1 gal
|
|
|
MEADOW-PLUG is a specially blended, extremely fast setting, hydraulic cement product designed to instantly stop running water or fluid seepage in concrete or masonry structures. This single component, high strength repair mortar permanently plugs non-moving cracks, joints, and voids.
|
|
|
|
|
|
|
|
|
|
Paddle Mixer
|
|
|
Ideal for stirring paint, drywall mud, and acoustic
|
|
|
|
|
|
|
|
|
|
Ardex SDF Feather Finish, 10lb Bag
|
|
|
Use ARDEX Feather Finish for flash-patching, skim-coating and to fill in ridges, gouges, depressions and seams on virtually any type of subfloor.
|
|
|
|
|
|
|
|
|
|
Ardex TWP Tilt-Wall Patch, 10lb Bag
|
|
|
ARDEX Tilt Wall Patch is a surface treatment for filling and smoothing interior and exterior vertical concrete or masonry surfaces prior to sealing or painting.
|
|
|
|
|
|
|
|
|
|
Evaporation Retardent, 45 oz
|
|
|
EVAPRE Evaporation Retardant is an economical, high-quality, water-based compound. It is specifically designed to form a thin monomolecular film to reduce rapid moisture loss from the concrete surfaces prior to curing. EVAPRE provides a significant aid in producing high-quality concrete flatwork. Rapid evaporation of water is retarded, slab surface conditions are normalized, and workers can adhere more closely to established finishing schedules. EVAPRE is also VOC-compliant.
EVAPRE significantly reduces plastic shrinkage and cracking, wind crusting, stickiness, and sponginess which often cause poor and uneven surface texture. These conditions result when the hydration is more rapid than the movement of bleed water to the surface. EVAPRE effectively combats and minimizes the effects of rapid drying conditions such as low humidity, low dew point, high winds, direct sunlight, hot weather, heated concrete or placement of concrete in a heated enclosure or interior area during cold weather. The protective film shield disappears as soon as the concrete is no longer plastic.
|
|
|
|
|
|
|
|
|
|
2" Plastic Drum Spigot
|
|
|
2" Plastic Drum Spigot, fits most 55 Gal drums. East on-off flow valve.
|
|
|
|
|
|
|
|
|
|
Ardex SDM Concrete Topping, 10lb Bag
|
|
|
The most versatile and technically advanced Portland cement-based topping on the market today!
|
|
|
|
|
|
|
|
|
|
Mixing Paddle
|
|
|
The mixing paddle is designed for use with the mixing drum to insure complete mixing of the material, with no unmixed powder left in the corners of the drum.
|
|
|
|
|
|
|
|
|
|
Ardex Full Depth Concrete Repair, 50 lb Bag
|
|
|
ARDEX FDM™ is a formable, pourable, pumpable, Portland cement-based structural repair mortar for horizontal exterior and interior concrete above, on or below grade. It is used at depths ranging from 1/2” to 4” neat, and up to 8” when extended with aggregate for deeper and full depth repairs. ARDEX FDM has a corrosion inhibitor built-in to protect reinforcing steel, is easy to apply, and readily bonds to concrete. The resulting patch has low shrinkage and resists delamination. Typical applications include balconies, plaza decks and parking decks.
|
|
|
|
|
|
|
|
|
|
B-30 Bonding Agent, 1 gal
|
|
|
Specco B-30 is a P.V.A. based copolymer liquid used to bond new concrete, mortar, stucco,
plaster and other cement or gypsum based materials to existing, clean, structurally sound surfaces. Specco B-30 may be used
integrally in the mix or as a bonding primer for horizontal and vertical, interior and exterior applications. Specco B-30 is
unaffected by the high alkalinity of gypsum, lime and cement and will rewet up to 72 hours for one time only after covering with
cement based toppings. After the applied topping has been allowed to dry completely, the surface will be moisture resistant.
|
|
|
|
|
|
|
|
|
|
Ardex SDM White Concrete Topping, 10lb Bag
|
|
|
The most versatile and technically advanced Portland cement-based topping on the market today!
WHITE
|
|
|
|
|
|
|
|
|
|
Ardex Fast-Set Concrete Repair, 50lb Bag
|
|
|
ARDEX TRM™ is a formable, pourable, pumpable, Portland cement-based, microsilica-modified structural repair mortar for deteriorated exterior and interior concrete above, on or below grade. It is used at depths ranging from 1/2” to 4” neat, and up to 8” when extended with aggregate for deeper and full depth repairs. ARDEX TRM is fast-setting, allowing foot traffic in just 2 hours, and vehicular traffic in as little as 6 hours. It is also easy to apply and readily bonds to concrete. Typical applications include plazas, parking garages and balconies.
|
|
|
|
|
|
|
|
|
|
Ardex Extended Concrete Repair, 80 lb Bag
|
|
|
ARDEX FDX™ is a formable, pourable, pumpable, Portland cement-based structural repair mortar for horizontal exterior and interior concrete above, on or below grade. ARDEX FDX contains pre-blended aggregate for precise jobsite control. It is used at depths ranging from 1 1/2” to 8”, has a corrosion inhibitor built-in to protect reinforcing steel, is easy to apply, and readily bonds to concrete. The resulting patch has low shrinkage and resists delamination. Typical applications include balconies, plaza decks and parking decks.
|
|
|
|
|
|
|
|
|
|
Ardex Horizontal Concrete Repair, 55lb Bag
|
|
|
ARDEX ERM™ EXTERIOR RAMP MORTAR is a trowel-grade, polymer-modified, Portland cement-based structural repair mortar. It is used at depths ranging from 1/4” to 2” neat, and can be extended up to 8” for deeper and full depth repairs of deteriorated exterior and interior concrete above, on or below grade. ARDEX ERM has a corrosion inhibitor built-in to protect reinforcing steel, is easy to apply and readily bonds to concrete. Typical applications include sidewalks, plazas, walkways, driveways, parking garages and balconies.
|
|
|
|
|
|
|
|
|
|
Ardex CD Fine Concrete Dressing, 20lb
|
|
|
Portland cement-based modified with high-performance polymers for high bond strength. Use ARDEX CD FINE over the surface of existing concrete to produce a new wear layer, as well as to fill in small surface defects such as spalls, gouges, and cracks. When mixed with water, the result is a creamy, smooth, slurry consistency that can be applied by trowel, squeegee, or hopper gun. Once applied, ARDEX CD FINE can be broom textured before it sets, for a reduced-slip surface.
|
|
|
|
|
|
|
|
|
|
Ardex SD P, 40lb Bag
|
|
|
Trowelable patch for smoothing and repairing floors. Developed to reduce curing time on pressed-for-time jobs.
|
|
|
|
|
|
|
|
|
|
Ardex CP Concrete Patch, 40lb Bag
|
|
|
ARDEX CP is a trowel-grade cementitious topping for filling and repairing areas of outdoor and indoor concrete above, on or below grade.
|
|
|
|
|
|
|
|
|
|
Ardex V 1200, 50lb Bag
|
|
|
ARDEX V 1200 is a self-leveling, no-troweling Portland cement-based underlayment with re-dispersible synthetic polymers.
|
|
|
|
|
|
|
|
|
|
Ardex GS-4, 50 lb Bag
|
|
|
A self-leveling underlayment used to smooth and repair an existing gypsum substrate that is otherwise unsuitable to receive new finish flooring.
|
|
|
|
|
|
|
|
|
|
Ardex CD Fine Concrete Dressing, White, 20lb
|
|
|
Portland cement-based modified with high-performance polymers for high bond strength. Use ARDEX CD FINE over the surface of existing concrete to produce a new wear layer, as well as to fill in small surface defects such as spalls, gouges, and cracks. When mixed with water, the result is a creamy, smooth, slurry consistency that can be applied by trowel, squeegee, or hopper gun. Once applied, ARDEX CD FINE can be broom textured before it sets, for a reduced-slip surface.
|
|
|
|
|
|
|
|
|
|
Ardex LU-100 Underlayment, 50lb Bag
|
|
|
ARDEX LU-100™ is a blend of high strength cements and powdered polymers for repairing existing above-grade floors prior to the installation of new floor coverings.
|
|
|
|
|
|
|
|
|
|
Ardex B20, Vertical Concrete Repair, 55lb Bag
|
|
|
ARDEX B 20™ is a trowel-grade, Portland cement-based, polymer modified, structural repair mortar for vertical and overhead concrete. It is used at depths ranging from 1/4” to 2” (6 mm to 5 cm) in a single lift, and can be installed in multiple lifts up to 8” (20 cm) for deeper repairs of deteriorated exterior or interior concrete. ARDEX B 20 has a corrosion inhibitor built-in to protect reinforcing steel, is easy to apply and readily bonds to concrete - virtually any vertical or overhead concrete surface that needs to be repaired.
|
|
|
|
|
|
|
|
|
|
Ardex E-25 Emulsion, 1 gal.
|
|
|
For use with ARDEX K 15 Self-Leveling Underlayment Concrete and ARDEX K-500 Self-Leveling Concrete Topping in certain applications, such as ARDEX K 15 over wood or metal and ARDEX K-500 application with heavy foot or fork lift traffic.
|
|
|
|
|
|
|
|
|
|
Ardex K-15, 55 lb Bag
|
|
|
Portland cement-based, high-strength, fast-setting, non-shrinking underlayment. Mix with water, pour or pump, spread, ready!
|
|
|
|
|
|
|
|
|
|
Ardex OVP Finishing Compound, 20lb Bag
|
|
|
Use for filling and smoothing interior and exterior overhead and vertical concrete or masonry surfaces prior to sealing or painting.
|
|
|
|
|
|
|
|
|
|
Ardex P-51 Primer, 1 gal
|
|
|
Solvent-free. Improves the adhesion of ARDEX products over standard absorbent dry concrete substrates.
|
|
|
|
|
|
|
|
|
|
Ardex Ardiseal Rapid Joint Seal
|
|
|
A two part, flexible joint filler designed for fast-track filling and sealing of moving joints. Requires no primer under normal conditions, is 100% solids providing no shrinkage in the joints and cures to a flexible material with 100% elongation.
|
|
|
|
|
|
|
|
|
|
Gauge Rake/Spreader
|
|
|
Gtool with adjustable depth guides for use with water-based smoothing compounds and ARDEX SD-T.
|
|
|
|
