|
|
|
|
 |
1/2" Drop-in Anchor
|
|

Drop-in anchors are internally-threaded, deformation-controlled expansion anchors with a preassembled expander plug, suitable for flush mount applications in solid base materials. The anchor is set by driving the expansion plug towards the bottom of the anchor using the setting tool. Drop-in anchors are also available in coil-threaded versions for 1/2" and 3/4" coil threaded rod.
|
|
 |
|
|
|
|
 |
1/2" Plastic Dowel Cap
|
|

Metal and plastic caps allow movement of dowels in expansion joints.
|
|
 |
|
|
|
|
 |
15" Straight Residential Ties, Ea.
|
|

Residential Form Ties for the 1 1/8" Forming System
|
|
 |
|
|
|
|
 |
13" Straight Residential Ties, Ea.
|
|

Residential Form Ties for the 1 1/8" Forming System
|
|
 |
|
|
|
|
 |
14" Straight Residential Ties, Ea.
|
|

Residential Form Ties for the 1 1/8" Forming System
|
|
 |
|
|
|
|
 |
16" Straight Residential Ties, Ea.
|
|

Residential Form Ties for the 1 1/8" Forming System
|
|
 |
|
|
|
|
 |
18" Straight Residential Ties, Ea.
|
|

Residential Form Ties for the 1 1/8" Forming System
|
|
 |
|
|
|
|
 |
13" Flat Ties, Ea.
|
|

Form Ties for the Steel-Ply Forming System
|
|
 |
|
|
|
|
 |
20" Straight Residential Ties, Ea.
|
|

Residential Form Ties for the 1 1/8" Forming System
|
|
 |
|
|
|
|
 |
26" Short End Cone Ties, Ea.
|
|

4-3/4" End, Each Side
Standard form ties for plywood forming
|
|
 |
|
|
|
|
 |
22" Straight Residential Ties, Ea.
|
|

Residential Form Ties for the 1 1/8" Forming System
|
|
 |
|
|
|
|
 |
26" Long End Cone Ties, Ea.
|
|

8-1/4" End, Each Side
Standard form ties for plywood forming
|
|
 |
|
|
|
|
 |
30" Short End Cone Ties, Ea.
|
|

4-3/4" End, Each Side
Standard form ties for plywood forming
|
|
 |
|
|
|
|
 |
5/8" Drop-in Anchor
|
|

Drop-in anchors are internally-threaded, deformation-controlled expansion anchors with a preassembled expander plug, suitable for flush mount applications in solid base materials. The anchor is set by driving the expansion plug towards the bottom of the anchor using the setting tool. Drop-in anchors are also available in coil-threaded versions for 1/2" and 3/4" coil threaded rod.
|
|
 |
|
|
|
|
 |
14" Flat Ties, Ea.
|
|

Form Ties for the Steel-Ply Forming System
|
|
 |
|
|
|
|
 |
30" Long End Cone Ties, Ea.
|
|

8-1/4" End, Each Side
Standard form ties for plywood forming
|
|
 |
|
|
|
|
 |
36" Long End Cone Ties, Ea.
|
|

8-1/4" End, Each Side
Standard form ties for plywood forming
|
|
 |
|
|
|
|
 |
24" Straight Residential Ties, Ea.
|
|

Residential Form Ties for the 1 1/8" Forming System
|
|
 |
|
|
|
|
 |
15" Flat Ties, Ea.
|
|

Form Ties for the Steel-Ply Forming System
|
|
 |
|
|
|
|
 |
16" Flat Ties, Ea.
|
|

Form Ties for the Steel-Ply Forming System
|
|
 |
|
|
|
|
 |
28" Short End Cone Ties, Ea.
|
|

4-3/4" End, Each Side
Standard form ties for plywood forming
|
|
 |
|
|
|
|
 |
28" Long End Cone Ties, Ea.
|
|

8-1/4" End, Each Side
Standard form ties for plywood forming
|
|
 |
|
|
|
|
 |
18" Flat Ties, Ea.
|
|

Form Ties for the Steel-Ply Forming System
|
|
 |
|
|
|
|
 |
26" Straight Residential Ties, Ea.
|
|

Residential Form Ties for the 1 1/8" Forming System
|
|
 |
|
|
|
|
 |
32" Short End Cone Ties, Ea.
|
|

4-3/4" End, Each Side
Standard form ties for plywood forming
|
|
 |
|
|
|
|
 |
40" Short End Cone Ties, Ea.
|
|

4-3/4" End, Each Side
Standard form ties for plywood forming
|
|
 |
|
|
|
|
 |
28" Straight Residential Ties, Ea.
|
|

Residential Form Ties for the 1 1/8" Forming System
|
|
 |
|
|
|
|
 |
20" Flat Ties, Ea.
|
|

Form Ties for the Steel-Ply Forming System
|
|
 |
|
|
|
|
 |
1" Metal Dowel Cap
|
|

Metal and plastic caps allow movement of dowels in expansion joints.
|
|
 |
|
|
|
|
 |
32" Long End Cone Ties, Ea.
|
|

8-1/4" End, Each Side
Standard form ties for plywood forming
|
|
 |
|
|
|
|
 |
42" Short End Cone Ties, Ea.
|
|

4-3/4" End, Each Side
Standard form ties for plywood forming
|
|
 |
|
|
|
|
 |
30" Straight Residential Ties, Ea.
|
|

Residential Form Ties for the 1 1/8" Forming System
|
|
 |
|
|
|
|
 |
22" Flat Ties, Ea.
|
|

Form Ties for the Steel-Ply Forming System
|
|
 |
|
|
|
|
 |
36" Short End Cone Ties, Ea.
|
|

4-3/4" End, Each Side
Standard form ties for plywood forming
|
|
 |
|
|
|
|
 |
1/2" x 18" Dowel Bar, Saw Cut
|
|

Pre Cut Dowel Bar
|
|
 |
|
|
|
|
 |
32" Straight Residential Ties, Ea.
|
|

Residential Form Ties for the 1 1/8" Forming System
|
|
 |
|
|
|
|
 |
24" Flat Ties, Ea.
|
|

Form Ties for the Steel-Ply Forming System
|
|
 |
|
|
|
|
 |
34" Straight Residential Ties, Ea.
|
|

Residential Form Ties for the 1 1/8" Forming System
|
|
 |
|
|
|
|
 |
3/4" Drop-in Anchor
|
|

Drop-in anchors are internally-threaded, deformation-controlled expansion anchors with a preassembled expander plug, suitable for flush mount applications in solid base materials. The anchor is set by driving the expansion plug towards the bottom of the anchor using the setting tool. Drop-in anchors are also available in coil-threaded versions for 1/2" and 3/4" coil threaded rod.
|
|
 |
|
|
|
|
 |
36" Straight Residential Ties, Ea.
|
|

Residential Form Ties for the 1 1/8" Forming System
|
|
 |
|
|
|
|
 |
26" Flat Ties, Ea.
|
|

Form Ties for the Steel-Ply Forming System
|
|
 |
|
|
|
|
 |
48" Short End Cone Ties, Ea.
|
|

4-3/4" End, Each Side
Standard form ties for plywood forming
|
|
 |
|
|
|
|
 |
Drain Tile 2" Hole Out
|
|

Black plastic 2" hole out used in foundation walls
|
|
 |
|
|
|
|
 |
38" Straight Residential Ties, Ea.
|
|

Residential Form Ties for the 1 1/8" Forming System
|
|
 |
|
|
|
|
 |
28" Flat Ties, Ea.
|
|

Form Ties for the Steel-Ply Forming System
|
|
 |
|
|
|
|
 |
40" Straight Residential Ties, Ea.
|
|

Residential Form Ties for the 1 1/8" Forming System
|
|
 |
|
|
|
|
 |
30" Flat Ties, Ea.
|
|

Form Ties for the Steel-Ply Forming System
|
|
 |
|
|
|
|
 |
42" Straight Residential Ties, Ea.
|
|

Residential Form Ties for the 1 1/8" Forming System
|
|
 |
|
|
|
|
 |
Z-Tie Holder
|
|

Form brakced used with Waler Ties for the Steel-Ply Forming System
|
|
 |
|
|
|
|
 |
32" Flat Ties, Ea.
|
|

Form Ties for the Steel-Ply Forming System
|
|
 |
|
|
|
|
 |
5/8" x 18" Dowel Bar, Saw Cut
|
|

Saw Cut Dowel Bar
|
|
 |
|
|
|
|
 |
48" Straight Residential Ties, Ea.
|
|

Residential Form Ties for the 1 1/8" Forming System
|
|
 |
|
|
|
|
 |
48" Long End Cone Ties, Ea.
|
|

8-1/4" End, Each Side
Standard form ties for plywood forming
|
|
 |
|
|
|
|
 |
Drain Tile 4" Coupler
|
|

Black plastic 4" draintile coupler
|
|
 |
|
|
|
|
 |
4" Green Drain Grate
|
|

Green plastic drain hole grate cover for 4" drain tile
|
|
 |
|
|
|
|
 |
36" Flat Ties, Ea.
|
|

Form Ties for the Steel-Ply Forming System
|
|
 |
|
|
|
|
 |
3/4" x 18" Dowel Bar, Saw Cut
|
|

Saw Cut Dowel Bar
|
|
 |
|
|
|
|
 |
Concrete Test Cylinder
|
|

Bio-degradable, Recycable, Virtually unlimited shelf life. BIO-CYLINDER test cylinders meet A.S.T.M. specifications C39,C192 and C470. BIO-CYLINDER mold is non-absorptive. Molded single unit for consistent dimensional uniformity; Smooth molded plastic allows quick,easy stripping. Strong, durable BIO-CYLINDER is weather resistant, eliminates job-site storage problems
|
|
 |
|
|
|
|
 |
40" Flat Ties, Ea.
|
|

Form Ties for the Steel-Ply Forming System
|
|
 |
|
|
|
|
 |
Drain Tile 6" Coupler
|
|

Connects 2 runs of 6" drain tile for one continuous length
|
|
 |
|
|
|
|
 |
3/4" x 24" Round Steel Stake
|
|

Ideal for all types of concrete flatwork projects. All stakes are manufactured from high carbon material to assure easy driving and long life. Steel stakes will not bend/points will not break.
|
|
 |
|
|
|
|
 |
42" Flat Ties, Ea.
|
|

Form Ties for the Steel-Ply Forming System
|
|
 |
|
|
|
|
 |
3/4" x 18" Epoxy Dowel Bar
|
|

Pre Cut Dowel Bar Epoxy Coated
|
|
 |
|
|
|
|
 |
Jahn Clamp
|
|

Single LIner Bracket, use with 2 x 4 Walers for Plywood Forming
|
|
 |
|
|
|
|
 |
60" Straight Residential Ties, Ea.
|
|

Residential Form Ties for the 1 1/8" Forming System
|
|
 |
|
|
|
|
 |
"E" Shaped Form Corner Clip
|
|

Corner Clip. Used with the 1-1/8" forming system to hold panels and corners together
|
|
 |
|
|
|
|
 |
72" Straight Residential Ties, Ea.
|
|

Residential Form Ties for the 1 1/8" Forming System
|
|
 |
|
|
|
|
 |
16 Ga. Tie Wire, Roll
|
|

Made of black annealed carbon steel, this roll of tie wire is strong enough to bundle rods, rebar, pipe and lumber.
Imported
|
|
 |
|
|
|
|
 |
4" Down Spout Adapter
|
|

Tile adapters connect the downspouts to drain tiles.
|
|
 |
|
|
|
|
 |
48" Flat Ties, Ea.
|
|

Form Ties for the Steel-Ply Forming System
|
|
 |
|
|
|
|
 |
3/4" x 12" Anchor Bolts, Each
|
|

Steel anchor bolts 3/4" x 12" nut and washer included
|
|
 |
|
|
|
|
 |
Steel Dog Stacking Clip
|
|

Used for Extending The Height of the Forms with Lumber
|
|
 |
|
|
|
|
 |
12" Curb Expansion Joint
|
|

FIBRE EXPANSION JOINT is composed of cellular fibers securely bonded together and uniformly saturated with asphalt to assure longevity. Wherever a cost-effective joint filler is required, FIBRE EXPANSION JOINT meets the need. Manufactured and marketed by W. R. MEADOWS since the early 1930s, FIBRE EXPANSION JOINT is backed by over 70 years of proven application experience. FIBRE EXPANSION JOINT is versatile, resilient, flexible and non-extruding. When compressed to half of its original thickness, it will recover to a minimum of 70% of its original thickness. FIBRE EXPANSION JOINT will not deform, twist or break with normal on-the-job handling. Breakage, waste and functional failure resulting from the use of inferior, foreign fiber materials can cost you time, dollars and can result in a substandard finished job, generating costly callbacks and rework expenses. However, the purchase and installation of FIBRE EXPANSION JOINT (a small segment of the total projects cost) contributes to both the final cost efficiency and functional success, far greater in proportion than its original cost.
|
|
 |
|
|
|
|
 |
1" x 18" Dowel Bar, Saw Cut
|
|

Saw Cut Dowel Bar
|
|
 |
|
|
|
|
 |
5/8" x 12" Anchor Bolts, Each
|
|

Steel anchor bolts 5/8" x 12" nut and washer included 50 per box
|
|
 |
|
|
|
|
 |
Dovetail Anchor Slot, 10' Length
|
|

Use dovetail anchor slots in new concrete structures and walls and in precast concrete. Slots are nailed to the concrete form before pouring concrete using each indented nail hole provided in the bottom of the dovetail channel. Slots are provided with foam filler to prevent concrete from entering the slot during the pour.
|
|
 |
|
|
|
|
 |
1/4" Diamond Dowel System with Plate
|
|

Achieve superior load transfer at construction joints with the original plate dowel system. Since 1997, contractors and engineers have used the Diamond Dowel® System in more than one billion square feet of concrete slabs-on-ground to deliver the durable, maintenance-free concrete flatwork customers expect.
|
|
 |
|
|
|
|
 |
Drain Tile 6" Hole Out
|
|

6" drain tile foundation hole out
|
|
 |
|
|
|
|
 |
4" Trench Drain End Outlet
|
|

The Dura Slope trench drain system consists of neutral and pre-sloped sections of trench drain. Manufactured from HDPE, this trench drain offers a durable alternative to concrete channel that will save time and reduce cost at installation.
|
|
 |
|
|
|
|
 |
2"x4" Carnie Cap
|
|

The Carnie Cap System is superior to any other rebar impalement protection available today. Unlike traditional rebar caps-which provide little or no impalement protection-the Carnie Cap System, when used properly, will withstand a 250 pound weight dropped from 10 feet without the rebar protruding. The Carnie Cap is also less expensive than troughs. In fact, only two Carnie Caps are needed per each eight foot section. Plus, by eliminating injuries, installation time and inventory overhead, Carnie Caps not only protect workers, they can protect a company’s bottom line.
|
|
 |
|
|
|
|
 |
Drain Tile 4" Tee
|
|

Tee Junction for 4" drain tile
|
|
 |
|
|
|
|
 |
1" x 18" Epoxy Dowel Bar
|
|

Pre Cut Dowel Bar Epoxy Coated
|
|
 |
|
|
|
|
 |
1" Slab Bolster with Runner, 5' Pc.
|
|

Slab Bolster upper is used for supporting one layer of steel above another and spacing them to required distance. May be used on soft material or fill. Standard leg spacing is 5 on centers. Heights and lengths are same as slab bolsters. Fabricated in standard 5-0 lengths.
|
|
 |
|
|
|
|
 |
Drain Tile 4" WYE
|
|

Wye Junction for 4" drain tile
|
|
 |
|
|
|
|
 |
16 Ga. Tie Wire, Roll
|
|

Made of black annealed carbon steel, this roll of tie wire is strong enough to bundle rods, rebar, pipe and lumber.
Made in the USA
|
|
 |
|
|
|
|
 |
1-1/2" Slab Bolster with Runner, 5' Pc.
|
|

Slab Bolster upper is used for supporting one layer of steel above another and spacing them to required distance. May be used on soft material or fill. Standard leg spacing is 5 on centers. Heights and lengths are same as slab bolsters. Fabricated in standard 5-0 lengths.
|
|
 |
|
|
|
|
 |
2" Slab Bolster with Runner, 5' Pc.
|
|

Slab Bolster upper is used for supporting one layer of steel above another and spacing them to required distance. May be used on soft material or fill. Standard leg spacing is 5 on centers. Heights and lengths are same as slab bolsters. Fabricated in standard 5-0 lengths.
|
|
 |
|
|
|
|
 |
3/4" x 30" Round Steel Stake
|
|

Ideal for all types of concrete flatwork projects. All stakes are manufactured from high carbon material to assure easy driving and long life. Steel stakes will not bend/points will not break.
|
|
 |
|
|
|
|
 |
1-1/2" Backer Rod, 6' Pc
|
|

CERA-ROD is a round, flexible, continuous-length, non-absorbent, non-gassing, non-staining and non-shrinking material extruded from a cross-linked polyethylene. Compression/deflection is approximately eight psi. Works equally well with concrete or asphalt surfaces. Use with hot-applied joint sealants...will not melt, shrink, evaporate or stain. Retains its original diameter and is non-gassing when exposed to high sealant temperatures. Prevents run-out through voids or bottom of the joint...saves sealant material. Acts as a bond breaker to stop sealant adhesion to the bottom side of the joint. Fast and easy to apply.
|
|
 |
|
|
|
|
 |
3/8" Diamond Dowel System with Plate
|
|

Achieve superior load transfer at construction joints with the original plate dowel system. Since 1997, contractors and engineers have used the Diamond Dowel® System in more than one billion square feet of concrete slabs-on-ground to deliver the durable, maintenance-free concrete flatwork customers expect.
|
|
 |
|
|
|
|
 |
3" Slab Bolster with Runner, 5' Pc.
|
|

Slab Bolster upper is used for supporting one layer of steel above another and spacing them to required distance. May be used on soft material or fill. Standard leg spacing is 5 on centers. Heights and lengths are same as slab bolsters. Fabricated in standard 5-0 lengths.
|
|
 |
|
|
|
|
 |
Drain Tile 8" Hole Out
|
|

8" drain tiel foundation hole out
|
|
 |
|
|
|
|
 |
1/2" Backer Rod, 50' pc
|
|

CERA-ROD is a round, flexible, continuous-length, non-absorbent, non-gassing, non-staining and non-shrinking material extruded from a cross-linked polyethylene. Compression/deflection is approximately eight psi (55.2 KPa) at 25% deflection. CERA-ROD is used in joints or large cracks in Portland cement or asphalt concrete. It provides the correct sealant reservoir configuration, controls joint depth and prevents sealant run-out through the bottom of the joint. CERA-ROD also acts as a bond-breaker to prevent bottom side sealant adhesion. Works equally well with concrete or asphalt surfaces. Use with hot-applied joint sealants...will not melt, shrink, evaporate or stain. Retains its original diameter and is non-gassing when exposed to high sealant temperatures. Prevents run-out through voids or bottom of the joint...saves sealant material. Acts as a bond breaker to stop sealant adhesion to the bottom side of the joint. Fast and easy to apply.
|
|
 |
|
|
|
|
 |
135 Degree Form Clip
|
|

Used with the 1-1/8" forming system. Simply form two filler panels together and attach the 135 degree clip to form a bay window.
|
|
 |
|
|
|
|
 |
3/4" Plastic Drum Spigot
|
|

3/4" Plastic Drum Spigot, fits most 55 Gal drums. East on-off flow valve.
|
|
 |
|
|
|
|
 |
24" Curb Expansion Joint
|
|

FIBRE EXPANSION JOINT is composed of cellular fibers securely bonded together and uniformly saturated with asphalt to assure longevity. Wherever a cost-effective joint filler is required, FIBRE EXPANSION JOINT meets the need. Manufactured and marketed by W. R. MEADOWS since the early 1930s, FIBRE EXPANSION JOINT is backed by over 70 years of proven application experience. FIBRE EXPANSION JOINT is versatile, resilient, flexible and non-extruding. When compressed to half of its original thickness, it will recover to a minimum of 70% of its original thickness. FIBRE EXPANSION JOINT will not deform, twist or break with normal on-the-job handling. Breakage, waste and functional failure resulting from the use of inferior, foreign fiber materials can cost you time, dollars and can result in a substandard finished job, generating costly callbacks and rework expenses. However, the purchase and installation of FIBRE EXPANSION JOINT (a small segment of the total projects cost) contributes to both the final cost efficiency and functional success, far greater in proportion than its original cost.
|
|
 |
|
|
|
|
 |
4" 90 Degree Elbow
|
|

Allows for 90 degree turns in drain tile in any direction.
|
|
 |
|
|
|
|
 |
1-1/4" x 18" Epoxy Dowel Bar
|
|

Pre Cut Dowel Bar
|
|
 |
|
|
|
|
 |
4" Slab Bolster with Runner, 5' Pc.
|
|

Slab Bolster upper is used for supporting one layer of steel above another and spacing them to required distance. May be used on soft material or fill. Standard leg spacing is 5 on centers. Heights and lengths are same as slab bolsters. Fabricated in standard 5-0 lengths.
|
|
 |
|
|
|
|
 |
6" Waler Bracket
|
|

Waler brackets can be used with standard wood boards or aluminum channels. Brackets attach directly to the concrete forms to straighten the wall and minimize the need for additional bracing. In most residential construction, one row of walers at the top of the wall is usually sufficient.
|
|
 |